Allied Vision Technologies GX1050 Manual de instalación descargar pdf (Pagina 25)

AVT GigE Cameras Installation Manual V1.1.0

Starting the camera

Power up

A camera power adapter for each GigE camera is available from Allied Vision.

Please consult the camera technical manual for connector definition and volt-

age specifications

Connect to host application

Use a Category 6 or higher rated Ethernet cable to connect the camera to the

host adapter. Crossover cabling is not required, but works—the camera has cir-

cuitry to determine if a crossover cable is being used.

www



Allied Vision Product literature

http://www.alliedvision.com/en/support/technical-

documentation

Caution



For Goldeye G, Prosilica, Mako, and Manta cameras:

• Use only DC power supplies with insulated cases.

• For all power connections use only shielded cables to

avoid electromagnetic interferences.

• Goldeye G, Mako, Manta, and Prosilica GT PoE models can

source power from:

– 802.3af (100 MBit/s and 1000 MBit/s), and

– 802.3at compliant PSE devices (Power Sourcing Equip-

ment): such as switches injectors or NICs

Caution



Bigeye G cameras

Operate Bigeye G cameras at 12 V (+ 5 %). The current is lim-

ited to max. 3.0 A. Operating Bigeye G cameras outside these

specifications may cause damage.

www



Accessories:

Please contact Allied Vision sales representative or your local

Allied Vision dealer for information on accessories:

http://www.alliedvision.com/en/about-us/where-we-

are.html

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 53 54

Sin comentarios

Allied Vision Technologies GX1050 Manual de instalación Pagina 25