Allied Vision Technologies GC1290 Especificaciones descargar pdf (Pagina 12)

GC1290 Technical Manual Page 8

Isolated Ground

Isolated Ground must be connected to the user’s external circuit ground if Sync Input 1 or Sync

Output 1 is to be used.

Signal Ground

Signal Ground must be connected to the user’s external circuit ground if Sync Input 2 or Sync

Output 2 is to be used or if the RS-232 port is to be used. Note that Signal Ground is common with

Power Ground however it is good practice to provide a separate ground connection for power and

signaling when designing the cabling.

Video Iris

This signal can be used to drive the video input of a video iris lens. See Addendum.

DNC

These signals are reserved for future use and should be left disconnected.

Item 3: Status LED 1

LED COLOR STATUS

Solid Orange Ethernet link established.

Flashing Orange Ethernet activity.

Item 4: Status LED 2

LED COLOR STATUS

Solid Green Normal operation.

Flashing once per second Boot up pending

3 quick flashes once per

second.

Camera fault.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 31 32

Sin comentarios

Allied Vision Technologies GC1290 Especificaciones Pagina 12