
GC1290 Technical Manual Page 2
Specifications
Sensor Type Sony ICX445ALA CCD (ICX445AQA for color)
Sensor Shutter Type Progressive Interline
Image Resolution 1280 x 960 pixels
Pixel Size 3.75μm x 3.75μm
Optical Forma
1/3 inch
Lens Moun
C-mount with adjustable back focus (CS-mount optional)
Color Sensor Filter Pattern
Bayer
Full Resolution Frame Rate 32.8 fps
Frame Rate (640 x 480 ROI) 59.8 fps
I/O 1 isolated input/output, 1 non-isola
ed input/output,
1 RS-232 input/output
Power Requirements Less than 3.0W
(5V to 16V)
Digitization 12 Bits
Trigger latency* 2us for non-isolated I/O, 10us for isolated I/O
Trigger Jitter* ±20ns for non-isolated I/O, ±0.5us for isolated I/O
Tpd* 10ns for non-isolated I/O, 1.3us for isolated I/O
Operating Temperature 0 to 50 Celsius***
Operating Humidity 20 to 80% non-condensing
Size 33mm (height) x 46mm (width) x 59mm (length)
Weigh
106g
Hardware Interface Standard IEEE 802.3 1000BASE-T, 100BASE-TX
Software Interface Standard GigE Vision Standard 1.0
Regulator
CE, FCC, RoHS
† Applies to GC1290C only.
†† Power consumption will increase with reduced ROI imaging and color interpolation.
††† Nominal operating voltage is 12V. Cameras have been tested at 12V.
* See Notes on Triggering in the Addendum.
***DUE TO THE SMALL PACKAGING AND HIGH SPEED OF THE GC CAMERAS, SPECIAL CARE IS REQUIRED TO
MAINTAIN A REASONABLE OPERATING TEMPERATURE. IF THE CAMERA IS TO BE OPERATED IN A WARM
ENVIRONMENT, IT IS SUGGESTED THAT THE CAMERA BE MOUNTED ON A HEAT SINK SUCH AS A METAL BRACKET
AND THAT THERE IS SUFFICIENT AIR FLOW.
Comentarios a estos manuales