Allied Vision Technologies AVT Stingray Manual de instrucciones Pagina 176
- Pagina / 309
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Controlling image capture
STINGRAY Technical Manual V2.2.0
175
SeqMode description
Sequence repeat counter
For each parameter set one can define an image repeat counter. Using the
image repeat counter means that a parameter set can be used for n consec-
utive images before the next parameter set is applied.
Setting the ImageRepeat field to 0 has the same effect like setting this field
to 1.
Manual stepping & reset
A sequence can be stepped further with a software command. To use manual
stepping use stepping mode 0x82 or 0x84, but don’t setup any input pin for
external sequence stepping.
Every time the PerformStep flag is set the sequence will be stepped one
parameter set further. Manual stepping observes the repeat counter also.
For some application it could be useful to reset the sequence during runtime.
Simply set the PerformReset flag to one: the sequence starts over with the
very first parameter set.
Sequence mode Description
0x80 This mode is the default sequence mode and stepping
the sequence is compatible to e.g. the Marlin series.
With each image integration start the sequence is
stepped one item further and the new parameter set
becomes active for the next image.
0x82 Stepping of the sequence is controlled by a rising edge
of an external signal. The new parameter set becomes
active with the next integration start. When using this
mode select the suitable input mode of the input lines.
0x84 Stepping of the sequence is controlled by a high level
of an external signal. The new parameter set becomes
active with the next integration start. When using this
mode select the suitable input mode of the input lines.
Other mode Choosing any other mode value, automatically defaults
to mode 0x80.
Table 68: Sequence mode description
Note
L
It is also possible, that a sequence consists of parameter sets
with different sequence modes. This can be achieved by using
the SeqMode and the ImageNo fields within the
Sequence_Param register.
- Technical Manual 1
- AVT Stingray 1
- Legal notice 2
- Contents 3
- Introduction 11
- Manual overview 14
- More information 17
- Before operation 17
- STINGRAY cameras 19
- Declarations of conformity 20
- FireWire 21
- FireWire in detail 22
- 1394b port 26
- 1394a camera 26
- 1394a port 26
- 1394b camera 26
- 1394b bandwidths 29
- Operating system support 35
- Filter and lenses 36
- Camera lenses 37
- Specifications 39
- STINGRAY F-046B/C (fiber) 41
- STINGRAY F-080B/C (fiber) 43
- STINGRAY F-145B/C (fiber) 45
- STINGRAY F-146B/C (fiber) 47
- STINGRAY F-201B/C (fiber) 49
- Spectral sensitivity 51
- Camera dimensions 57
- Tripod adapter 59
- Cross section: CS-Mount 68
- Cross section: C-Mount 69
- Stingray board level: C-Mount 73
- Camera interfaces 74
- Status LEDs 78
- Normal conditions 79
- Error conditions 79
- Stingray board level models) 90
- Pixel data 93
- Color cameras 97
- White balance 98
- Automatic white balance 101
- Auto shutter 102
- Auto gain 104
- Manual gain 107
- Horizontal mirror function 109
- Shading correction 110
- How to store shading image 111
- Output = f (Input) 117
- Vertical binning 121
- What is sub-sampling? 126
- Description of sub-sampling 126
- Description of the data path 130
- Why new timing modes? 134
- ☺ Disadvantage 136
- Packed 12-Bit Mode 139
- Deferred image transport 141
- HoldImg mode 142
- FastCapture mode 144
- Sharpness 147
- Hue and saturation 148
- Color correction 149
- Color conversion (RGB YUV) 151
- Bulk Trigger 151
- Level Trigger 151
- Serial interface 152
- Name Field Bit Description 153
- Controlling image capture 157
- Trigger delay 162
- Exposure time offset 164
- Minimum exposure time 165
- Extended shutter 165
- One-shot 167
- Exposure 169
- Multi-shot 170
- ISO_Enable / free-run 170
- Asynchronous broadcast 170
- Jitter at start of exposure 171
- Sequence mode 173
- SetupMode to 177
- Disable SetupMode 177
- SIS: Definition 182
- SIS: Scenarios 182
- Area of interest (AOI) 201
- Autofunction AOI 203
- Frame rates 204
- Frame rates Format_7 208
- Test images 217
- Test images for color cameras 218
- Configuration of the camera 219
- ADV_FNC_INQ 222
- Sample program 223
- Example FireStack API 224
- Configuration ROM 225
- 424h + 000004 x 4 = 434h 226
- 440h + 0000xx * 4 = 444h 226
- = value of directory entry 226
- 0-7 8-15 16-23 24-31 226
- Camera initialize register 228
- PIO_Control_Quadlet_Offset 241
- SIO_Control_Quadlet_Offset 241
- Strobe_Output_Quadlet_Offset 241
- Name Description 245
- Format_7 250
- Temperature register 252
- Advanced registers summary 253
- Advanced feature inquiry 258
- Camera status 260
- Maximum resolution 261
- Time base 261
- Look-up tables (LUT) 265
- [8..31] In bytes 268
- Frame information 272
- Input/output pin control 272
- Auto shutter control 274
- Auto gain control 275
- Mirror image 278
- Soft reset 279
- Maximum ISO packet size 281
- Parameter-List Update 285
- Format_7 mode mapping 286
- Secure image signature (SIS) 288
- Cycles Seconds 289
- Cycle count 290
- User profiles 293
- GPDATA_BUFFER 297
- Firmware update 298
- Appendix 299
- , 102, 104, 105, 107, 251 300
- , 115, 118 304
- , 184, 218 304
Relacionado con productos y manuales para Cámaras De Seguridad Allied Vision Technologies AVT Stingray
(16 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.089 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales