Allied Vision Technologies AVT Stingray Manual de instrucciones Pagina 275
- Pagina / 309
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Configuration of the camera
STINGRAY Technical Manual V2.2.0
274
If both auto gain and auto shutter are enabled and if the shutter is at its
upper boundary and gain regulation is in progress, increasing the upper auto
shutter boundary has no effect on auto gain/shutter regulation as long as
auto gain regulation is active.
Auto gain control
The table below illustrates the advanced register for auto gain control.
MinValue and MaxValue limits the range the auto gain feature is allowed to
use for the regulation process. Both values are initialized with the minimum
and maximum value defined in the standard GAIN_INQ register.
Changing the auto gain range might not affect the regulation, if the regu-
lation is in a stable condition and no other condition affecting the image
brightness is changed.
If both auto gain and auto shutter are enabled and if the gain is at its lower
boundary and shutter regulation is in progress, decreasing the lower auto
gain boundary has no effect on auto gain/shutter regulation as long as auto
shutter regulation is active.
Both values can only be changed within the range defined by the standard
GAIN_INQ register.
Note
L
As with the Extended Shutter the value of MinValue and
MaxValue must not be set to a lower value than the minimum
shutter time.
Register Name Field Bit Description
0xF1000370 AUTOGAIN_CTRL Presence_Inq [0] Indicates presence of this
feature (read only)
--- [1..3] Reserved
MaxValue [4..15] Maximum auto gain value
--- [16..19] Reserved
MinValue [20..31] Minimum auto gain value
Table 131: Advanced register: Auto gain control
- Technical Manual 1
- AVT Stingray 1
- Legal notice 2
- Contents 3
- Introduction 11
- Manual overview 14
- More information 17
- Before operation 17
- STINGRAY cameras 19
- Declarations of conformity 20
- FireWire 21
- FireWire in detail 22
- 1394b port 26
- 1394a camera 26
- 1394a port 26
- 1394b camera 26
- 1394b bandwidths 29
- Operating system support 35
- Filter and lenses 36
- Camera lenses 37
- Specifications 39
- STINGRAY F-046B/C (fiber) 41
- STINGRAY F-080B/C (fiber) 43
- STINGRAY F-145B/C (fiber) 45
- STINGRAY F-146B/C (fiber) 47
- STINGRAY F-201B/C (fiber) 49
- Spectral sensitivity 51
- Camera dimensions 57
- Tripod adapter 59
- Cross section: CS-Mount 68
- Cross section: C-Mount 69
- Stingray board level: C-Mount 73
- Camera interfaces 74
- Status LEDs 78
- Normal conditions 79
- Error conditions 79
- Stingray board level models) 90
- Pixel data 93
- Color cameras 97
- White balance 98
- Automatic white balance 101
- Auto shutter 102
- Auto gain 104
- Manual gain 107
- Horizontal mirror function 109
- Shading correction 110
- How to store shading image 111
- Output = f (Input) 117
- Vertical binning 121
- What is sub-sampling? 126
- Description of sub-sampling 126
- Description of the data path 130
- Why new timing modes? 134
- ☺ Disadvantage 136
- Packed 12-Bit Mode 139
- Deferred image transport 141
- HoldImg mode 142
- FastCapture mode 144
- Sharpness 147
- Hue and saturation 148
- Color correction 149
- Color conversion (RGB YUV) 151
- Bulk Trigger 151
- Level Trigger 151
- Serial interface 152
- Name Field Bit Description 153
- Controlling image capture 157
- Trigger delay 162
- Exposure time offset 164
- Minimum exposure time 165
- Extended shutter 165
- One-shot 167
- Exposure 169
- Multi-shot 170
- ISO_Enable / free-run 170
- Asynchronous broadcast 170
- Jitter at start of exposure 171
- Sequence mode 173
- SetupMode to 177
- Disable SetupMode 177
- SIS: Definition 182
- SIS: Scenarios 182
- Area of interest (AOI) 201
- Autofunction AOI 203
- Frame rates 204
- Frame rates Format_7 208
- Test images 217
- Test images for color cameras 218
- Configuration of the camera 219
- ADV_FNC_INQ 222
- Sample program 223
- Example FireStack API 224
- Configuration ROM 225
- 424h + 000004 x 4 = 434h 226
- 440h + 0000xx * 4 = 444h 226
- = value of directory entry 226
- 0-7 8-15 16-23 24-31 226
- Camera initialize register 228
- PIO_Control_Quadlet_Offset 241
- SIO_Control_Quadlet_Offset 241
- Strobe_Output_Quadlet_Offset 241
- Name Description 245
- Format_7 250
- Temperature register 252
- Advanced registers summary 253
- Advanced feature inquiry 258
- Camera status 260
- Maximum resolution 261
- Time base 261
- Look-up tables (LUT) 265
- [8..31] In bytes 268
- Frame information 272
- Input/output pin control 272
- Auto shutter control 274
- Auto gain control 275
- Mirror image 278
- Soft reset 279
- Maximum ISO packet size 281
- Parameter-List Update 285
- Format_7 mode mapping 286
- Secure image signature (SIS) 288
- Cycles Seconds 289
- Cycle count 290
- User profiles 293
- GPDATA_BUFFER 297
- Firmware update 298
- Appendix 299
- , 102, 104, 105, 107, 251 300
- , 115, 118 304
- , 184, 218 304
Relacionado con productos y manuales para Cámaras De Seguridad Allied Vision Technologies AVT Stingray
(16 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.096 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales